Thank you for stopping by! We specialize in automotive aftermarket installations and iPod/iPhone integration for both OEM and aftermarket radios. Have any questions and/or comments? Our customer service team is ready to help.This fixed-price listing includes a radio mounting kit with antenna adapter and the PAC's radio replacement interface for SELECT GMC, Chevrolet, Buick, Pontiac, Oldsmobile, Hummer & Cadillac models. This kit is made of factory textured ABS plastic. It fits 2-DIN, Shaft & ISO mount radios. There is no cutting required for DIN applications and it has a recessed DIN opening. Features custom designed mounting brackets, DIN sleeve support rails and ISO mount capability. Includes custom ISO trim ring. Matches perfectly to dash contour. Comes with convenient factory trim bezel locator nubs. Includes all mounting hardware and fully illustrated instructions. It also features a molded full size pocket. The PAC's Radio Replacement interface allows the replacement of a factory radio in select General Motors vehicles with Class II radios.
Using this interface will retain factory features such as OnStar, warning chimes, Rear Seat Controls (RSC), Rear Seat Entertainment (RSE) and the BOSE amplifier when the original radio is removed. The OS-2X also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake. General Installation and Operation Manual. In-field updateable firmware via USB.Chime Module Included, with 4 level adjustability. Retains OnStar when the factory radio is replaced. Retains Bose amplified audio system (if equipped). Provides 10 Amp 12-volt accessory output. Retains all safety warning chimes.
Maintains a healthy status on the Class II databus. Retains Rear Seat Radio Controls. Retains Rear Seat Audio (connects to aftermarket radio aux input). Plug-in installation for vehicles with 24-pin harness.Includes the radio specific Antenna adapter. Due to in dash depth restrictions some radios may not fit dash opening. Some installations might require minor kit modifications. Only compatible with 1-DIn with pocket, or 2-DIN aftermarket radios. The aftermarket radio must have an auxiliary input in order for the factory RSE audio to be retained through the cabin speakers. RSC buttons that are identical to the SWC will mimic the SWC function for function. The interfaces accessory output is only rated at 10 amps. It is designed for the new aftermarket head unit ONLY. For Bose systems, the recommended line level input is 2-4 volts from the aftermarket radio.
To prevent over driven audio when installing into a vehicle with a Bose system and the aftermarket radio does not have low level outputs then an LOC (part # LP3-2) is recommended to match the input voltage or you can create an audio attenuation circuit. To prevent ground loop or engine noise when installing aftermarket radios that use a common ground on the outer shield of the low level outputs will require a ground loop isolator. Only compatible with listed vehicles. For all your radio replacement needs, check our Radio Replacement listings here. This is what most consider is the hardest part of the installation.With this diagram; installation is a piece of cake. Vehicles NOT made for the U.
Market are not compatible and are not guaranteed. The item "Radio Replacement Interface & Dash Kit 2-DIN for GM Vehicles with OnStar/Bose" is in sale since Wednesday, April 13, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Dash Panels & Glove Boxes\Dash Panels".1" and is located in Miami, Florida.
This item can be shipped worldwide.