Thank you for stopping by! We specialize in automotive aftermarket installations for both OEM and aftermarket radios.Have any questions and/or comments? Our customer service team is ready to help. This fixed-price listing includes a brand new Dash kit HONK840, the Vehicle Antenna adapter & the PAC RP4-HD11 RadioPro Radio Replacement Interface With Built In Pre-Programmed Steering Wheel Control Retention and Navigation Outputs. It's compatible with select Honda Civic vehicles.
See Vehicle Compatibility table below. The all new RP4-HD11 Radio Replacement Interface requires no programming or complex installation methods. In one unit, you get a complete solution for radio replacement and steering wheel control functions.The RP4-HD11 communicates directly with the vehicle's data-bus and comes pre-loaded with software that retains OEM amplifier, Steering wheel Software, 12V Accessory, Vehicle Speed Sense (VSS), Illumination, Parking Brake, and Reverse gear indicator features making it ideal for installing aftermarket Navigation or Non-Navigation Radios while maintaining the vehicle's wiring integrity also great for leased vehicles! Works in vehicles without OnStar ® or when OnStar is not serviced or wanted. The HONK840 kit is made out of factory textured ABS plastic.
It includes fully adjustable ISO mounting brackets, instructions and mounting hardware. Due to in-dash depth restrictions, some radios may not fit dash opening and/or some minor kit modifications might have to be done during installation. PLEASE READ: IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY NAVIGATION UNIT.
This is necessary due to models equipped with navigation having a different plug in which the MS-CAN, subwoofer and reverse camera wires are located. Vehicles equipped with a 7 touchscreen: Once the factory head unit has been removed you will no longer be able to set the clock or date on the factory display as this is derived from the factory head unit. The date on the screen can be permanently removed by disconnecting the battery to clear the screen's memory.
In order to set the clock you will need to disconnect the vehicles battery at 1:00 as this is the time the screen defaults to once it has been reset. Compatible with select Honda vehicles featuring a "BOSE Amplified System", "Standard" or " Premium", without Onstar or if OnStar® is not wanted. Recommended Line-level input is 2-4 Volts from aftermarket radio. RP4-HD11 does not retain factory OnStar. Includes the radio specific Harness & Antenna adapter.Due to in dash depth restrictions some radios may not fit dash opening. Some installations might require minor kit modifications.
Only compatible with double /single din aftermarket radios. Only compatible with these listed vehicles.
Built in pre-programmed SWC retention. Supplies warning tone from it's built-in speaker for; door ajar, seat belt, low oil pressure, hi-temp, low fuel, etc. Provides +12v switched accessory output. No more searching for switched +12v in fuse box or kick panel.New radio will operate with the vehicle RAP (Retained Accessory Power) system. Retains factory amplifier (standard & premium). Retains Rear Seat Controls (most vehicles). Includes the radio Antenna adapter. This will fit Double Din radios, or Single din radios with a Pocket Space. Additional Notes We encourage all installations be done by a professional certified technician. Vehicles NOT made for the U. Market are not compatible and are not guaranteed. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Dash Panels & Glove Boxes\Dash Panels".
1" and is located in this country: US. This item can be shipped worldwide.